Disneyland Haunted Mansion Hallway Diorama

The last of the Disneyland Haunted Mansion Diorama rooms is the Hallway. This one is a simple construction, mostly used to house a 50% scale build of the Demon Clock from The Disney Experience web site. http://www.disneyexperience.com/ This is a great site for any fan of Disneyland.

This first image shows the basic construction. This is one more of the 1 foot square rooms, sized like the others. On the left side is a straight wall with a bit of Haunted Mansion Foyer wallpaper. The right side is set at an angle for a little more interest with the spooky eyes wallpaper from the Disneyland Haunted Mansion Hallway. The wood flooring is just some wood contact paper. And of course the Demon Clock from The Disney Experience built at 50% scale to fit the model. After finishing this room I picked up a smaller paper model from Trader Sam at The Disney Experience that would have been a better fit, but I already built this one, so it stays.

Here is the finished model. This includes a little lead figure suit of armor, that I put on a box to bring it up a bit in the display. The door on the right is just a print out  pasted onto a piece of black foam core, cut out, and attached to the wall. The picture and the Tomb Sweet Tomb on the wall are from a little Disneyland Haunted Mansion paper box that I found on one of the Disney web sites, family.go.com You can find tons of great Disney stuff on this site. The link will take you to the Disneyland Haunted Mansion paper box.

Finished Disneyland Haunted Mansion Paper Model at 200%

Well here it is, the finished model. This works great at 200% and I almost feel like rebuilding the other Haunted Mansions from HauntedDimensions.com at 200% as well. If I have some spare time this year I may just do that.

Disneyland Haunted Mansion Paper Model from HauntedDimensions.com, built at 200% scale

You get a bit of a feeling for how large this is with it just sitting here on my dining room table. But to really see the enlargement, here is another picture next to one of the HauntedDimension.com models built at 100% size. The other model is of the Paris Disney Haunted Mansion and is about the same size this enlarged one would be if built at the regular scale.

Disneyland Haunted Mansion Paper Model from HauntedDimensions.com, built at 200% scale next to another building built at 100% scale to show the enlargement.

The nice thing about the enlarged size, it is big enough to look correctly scaled with my store bought Halloween village decorations. This model looks great at 200%, all of the detail holds up perfectly. It really feels like it was meant to be built at this size.

Disneyland Haunted Mansion Stretching Room Diorama

The 3rd part of the 4 part Disneyland Haunted Mansion Diorama set is the Stretching Room. This was a quick build based upon 4 bookmarks available at Haunted Dimensions, link at right.

Disneyland Haunted Mansion Stretching Room Diorama, approximately 1/12 scale. This one is real easy, mostly just printouts with some practical lighting.

Here is the finished diorama, with practical lighting effects. Below are several build pictures of this simple diorama.

This Disneyland Haunted Mansion Stretching Room Diorama is based around 4 bookmarks by Ray Kiem and his Haunted Dimensions. Link on the right. It was his model of the Conservatory Coffin and these bookmarks that gave me the idea to do this 4 part diorama.

Here are the 4 bookmarks from Haunted Dimensions. The pictures slide in and out of the bookmark, but I am using them glued in the fully extended position. They are sitting inside of the basic 1 foot square diorama box, this time in white foam core (I ran out of black). The back wall is simply 4 foam core panels.

Disneyland Haunted Mansion Stretching Room Diorama, showing basic form and contact paper

The back wall was covered with standard wood grain contact paper available at most hardware and home improvement stores.

Disneyland Haunted Mansion Stretching Room Diorama, showing the wall panels in place

Here is a top view showing the wall panels lined up against the display walls.

Disneyland Haunted Mansion Stretching Room Diorama, with contact paper applied to the wall panels.

And here are the walls with the contact paper applied.

Disneyland Haunted Mansion Stretching Room Diorama, applying the floor printouts.

In this picture you can see that the bookmarks have been glued to the wall panels. The floor is made from several printouts of the same wall pattern used in the Disneyland Haunted Mansion Attic diorama. This time cut into triangles and glued to the floor. The extra white spaces were filled in with more of the wall print.

Disneyland Haunted Mansion Diorama finished, with practical lighting effects.

And here again is the finished Disneyland Haunted Mansion Stretching Room Diorama. The lights were some miniature battery operated Christmas lights that I had layout around from last year. These were picked up in a craft store and are designed for use in Christmas Village displays. Installing them was simplicity itself, I simply poked a pencil through the front of the display at the top of each candle in the bookmarks and stuck the lights through from the back side. The figure is a Disneyland Haunted Mansion Action Figure of the Caretaker. He may or may not make it into the final display, I haven't decided yet.

Just one diorama to go, that is a bit of the hallway showing the Demon Clock and a doorway. With of course that spooky eyes wallpaper.

Disney Haunted Mansion Attic Diorama

Here are some shots from my diorama of the Attic in Disney's Haunted Mansion. There is still a little bit of detail work to do, but this one is mostly finished. Next up is the hallway with the Demon Clock, wall pictures and one of the doors.

Disneyland Haunted Mansion Attic Diorama, showing printouts of wall and floor

Here is the basic box for the Disneyland Haunted Mansion Attic diorama. Just like the Conservatory diorama, this one is 1 foot square. The back wall slopes in a bit. The back wall, and the floor are simply some wood look paneling that I did up in Photoshop.

Disneyland Haunted Mansion Attic Diorama with wall and floor installed. Plus roof beam and haunted portrait.

Here the paneling and flooring is fully installed. Also installed is a brace and joists, made from some foam core with more of the wall printing glued on for detail. The picture is from the Disneyland Haunted Mansion that I found online, one of the Bride pictures. I placed it into a frame I found at a crafts store.

Disneyland Haunted Mansion Attic Diorama, stuff collected for the display, mostly paper models.

Here is some of the stuff I collected to fill up the Attic. In front, of course, is the Bride. This is a Disneyland Toy and stands about 6 inches tall. Just to her right is a vase with flowers and to the far right is a wedding cake. Both of these are from a Party Store and are candles used for weddings. The lantern in the front center is a Colman givaway that I have had around forever. Most of the rest is an assortment of paper models that I found all over the web. Different boxes, trunks, furniture, etc.  The wrinkled picture in the background is a printout of a photo of the actual Disneyland Haunted Mansion Attic that I am using for inspiration. I am not making an exact replica, but it will feel right. The Demon Clock is for the Hallway diorama.

Disneyland Haunted Mansion Attic Diorama finished, except for cobwebs

Here is everything placed into the Diorama. I still need to move a few things around, take off that black base on the Bride, glue everything down and add cobwebs, but this is basically it. There is another picture of the Bride from the actual ride to the left of the Bride, in a small frame from a crafts store. It is kind of hard to make out in this photo but in the back right corner is a worn out mirror, this is actually a Disneyland Haunted Mansion Toy from McDonald's, I painted the frame gold instead of the purple plastic it came with. It is sitting on a plastic trunk that is another McDonald's Disneyland Haunted Mansion toy. Also impossible to make out in the photo are the cards on the table, those are actual doll house sized wedding cards from the turn of the last century. With the right spooky lighting this will look great.

Disneyland Haunted Mansion Consevratory Coffin Paper Model Diorama

Here is a shot of another part of this year's Halloween Village Display, based on Disneyland's Haunted Mansion. This is using another model from Ray Kiem at Haunted Dimensions (link on right), the Conservatory Coffin. I did a bit of extra detailing to spruce up the model: The hands were printed on the coffin lid, I cut those out and made them stand just off of the lid. The candle sticks were originally 2 sided in the model and looked rather flat, I cut out 3 sides for each candle, folded them in the middle and glued them together giving each candle 3 sides and a much more realistic effect. The model is kept at 100% scale since it fits in nicely with my display plans. Some other updates, the cutouts on the side were just printed in the model, I actually cut those out. And I also cut out the handles and made those 3D. The display is 1 foot square.

Disneyland Haunted Mansion Paper Model Conservatory Coffin from Haunted Dimensions as the center piece for a diorama of the Conservatory.

The base for this diorama is black foam core. The tile flooring is just some art I did up in Photoshop and printed onto card stock. The window is in 3 parts, the black window framing is black cardboard with squares cut out - took a while to do that. Behind that is some tracing paper, and behind the tracing paper are a couple of tree silhouettes cut out of more black cardboard. Nothing fancy but gives a great effect. The flowerpots (hard to see in this photo) are model doll house stuff from Michael's Arts and Crafts. The Flowers are from another craft store, just ordinary fake flowers (lupines, I believe) that I cut the ends off of to use in this diorama. Just had to find some fake flowers with really small petals. Of course there is some basic floral moss tossed around for effect and some standard Halloween spider webbing to finish of the look. This is part 1 of 4 that are going to be displayed below the haunted mansion display.  The next up is the Attic.

More Construction on Disney's Haunted Mansion Paper Model 200% Scale

Here are a couple more photos from my build of the Disneyland Haunted Mansion in New Orleans Square. This is a 200% blow up of the model at Haunted Dimensions (link on right).

Disney's Haunted Mansion Paper Model build at 200%

In this photo I have added in the first floor railings, the second floor balcony, the second floor railings and I am working on the 2nd floor roof. The construction has been going along as listed in the build instructions included with the model. Some times I need to resort to some drastic measures to keep things in line while glue dries, this is one example. A clamp on the roof edge, held by a a rubber band for tension then held by some wire around the house. Not elegant, but it worked.

Close Up of 2nd floor railings on the Disneyland Haunted Mansion Paper Model

Here is a nice shot of the 2nd floor railings. These are printed on ink jet transparency film and are the single most expensive part of this year's Halloween display. The transparency sheets cost me $60 for a pack of 50 at Staples and I used up quite a few on these railings. Expensive, but there was no way around this. These railings look great and will be perfect once the model is in place and lit properly. In this shot it almost looks like a real house. It is amazing how well this model holds up to the 200% enlargement. More testament to Ray Kiem's design skills. Thanks Ray, I will send you picks of the finished model once it is in the display.

Disney Haunted Mansion Paper Model Floor Construction

Here are a couple of views of the Disney Haunted Mansion Paper Model that show some of the problems with working at a 200% enlargement.

Disney Haunted Mansion Paper Model Floor Construction

Here I am gluing the floor onto a piece of black foam core to give some structure to the model and to help keep the model straight. You can also see some of the difficulty in working at this size. The metal ruler is 15" long. The two black round things are a couple of heavy weights that I took off of a broken desk lamp. The round  coins in the back are $1 coins that I never spend (just don't like them) but they make great small weights for paper model work.

Disney Haunted Mansion Paper Model Floor Construction

Here I am attaching the floor to the bottom of the model. The floor glues inside the model and is held in place by gluing a tab running all the way around onto the inside of the walls. Here you see all of the paper clamps I am using to hold things together while it dries. You can also see some thumb tacks at the corners keeping things square. After this step I glued the whole thing onto a larger piece of black foam core to act as a final base. Of course the final base also has a hole cut in it to allow access to the inside for assembly and also to wire in some porch lights later on.

Starting the Disney Haunted Mansion Paper Model from Ray Kiem at 200%

I will be showing some build pictures of this model as I work on it. This won't be a step-by-step how to as the model comes with great instructions, but I will be showing some of the difficulties encountered due to the 200% scale up.

Disneyland New Orleans Square Haunted Mansion Paper Model from Haunted Dimensions and Ray Kiem. 200 % scale up

Just to give some scale, here is an early Disneyland Haunted Mansion Paper Model build picture, right after I connected the walls together. The model is sitting on my "Build Area" which is a cutting mat that is 11"x17", more than enough for most models, but this house completely fills the space. You can also see in this image a line running up through the middle of the right side windows, that is a seam where 8x11 sheets of cover stock were glued together to make the larger size needed for the model.

Roof segment from the Disneyland New Orleans Square Haunted Mansion Paper Model, gluing the pieces together.

To build the model at this size I imported the PDF document into Photoshop and enlarged it 200%, so what would normally fit on 1 8x11 sheet of cardstock now requires 4 8x11 sheets. I had to do some positioning to get as much important detail to fit onto each 8x11 sheet as possible, and then overlapped the sheets where possible along natural seams, like this roof ridge. I am using a heavy weight sitting on a 6" plastic ruler to keep the seam flat while the glue dries. Wish I had a large sale printer available.

Disneyland Haunted Mansion Paper Model, a look at the inside

Here is a shot looking at the inside of the Disneyland Haunted Mansion Paper Model walls. You can clearly see the seams in this shot. The square boxes are the window inserts. You can also see some of the warping of the walls caused by the thinness of the paper. Since the model is 200% larger, the card stock I am using is effectively 200% thinner than it would be on the regularly scaled model, so my model has some stiffness issues. These will mostly be solved when the balconies and roof are added, giving more stiffness to the model.

You can find the link for this model on the right side of my Blog, it is Haunted Dimensions. If you are a fan of Disneyland and the Haunted Mansion in New Orleans Square, then this is a must build.

Disney Haunted Mansion Toys added for the Halloween Village Display

I found these Disney Haunted Mansion toys on eBay. There are two different sets of toys from Disney for their Haunted Mansion. The set I chose was the least expensive, less detailed but enough for my needs this year. Maybe next year I will grab the other set. Even so these cost about $9 each, so a bit of an investment for this display but I think it is worth it. Really needed some authentic Disney stuff.

The Care Taker (with dog) and the Prisoner (Gus) for the Disneyland Haunted Mansion Halloween Village Display

The Traveler and The Bride for the Disneyland Haunted Mansion Halloween Village Display

The Skeleton (Ezra) for the Disneyland Haunted Mansion Halloween Village Display

All of these Haunted Mansion toys are from the Disney Magic Kingdom in Florida. The Haunted Mansion Hitchhiking Ghosts will be going outside of the Haunted Mansion, towards one side of the Cemetery. The Haunted Mansion Caretaker will of course be under a tree near the entrance to the Cemetery and the Haunted Mansion Bride will be in the Haunted Mansion Attic Display (one of the interior dioramas below the exterior display).

First - Disney's Haunted Mansion paper model from Haunted Dimensions

Disneyland Haunted Mansion in New Orleans Square, paper model from Ray Keim and Haunted Dimensions.

The main focus of this year's Halloween Village Display will be Ray Keim's New Orlean's Square Disneyland Haunted Mansion. This is a great paper model of the Disneyland Haunted Mansion, with an interesting use of transparency sheets for printing of the railings. I wanted something that would blend in better with the Disney toys I plan on using, so I enlarged the model 200% in Adobe Photoshop. This required 4 sheets glued together for each page of the original model, but it is making for an impressive build. You can find Ray's site in our list of favorite sites on the right, Haunted Dimensions. A must visit for any fan of Disney's Haunted Mansion.

I will be showing you several build pictures as this project progresses. Other models I will be using from Ray this year are the Conservatory Coffin, his tomb stones, and the entrance gate for the Disneyland New Orleans Haunted Mansion. Lots of other smaller models from other sites, but the focal point is this wonderful model.

New ideas for Our 2011 Halloween Village Display

We have been working all year on a new display for 2011, lots of photos to come. This year's display will feature a 200% scale up of the original Haunted Mansion from Disneyland, that's why we didn't feature that house in last year's display. Along with that this year will be a double decker affair. The display is divided into two levels. The top level (table top level) is similar to our normal displays in that it is an exterior diorama, but this year we are setting up the house and grounds around the Disney Haunted Mansion, taking some liberties of course. Included will be several Disney character toys and some new effects.

Below this we have the interior of the Haunted Mansion, using as many paper models as we could find, showing 4 rooms from the ride recreated as larger scale dioramas. In my next post I will begin to document the construction of the enlarged Haunted Mansion paper model.

Ectomobile Ecto-1 and the right side of the 2010 display

Ecto-1 Ectomobile from Ghostbusters paper model. The trick or treaters are paper cutouts from clip art.

The Disney Liberty Square Haunted Mansion in back with the Up roof in front.
Notice the stick on ghosts on the window glass

Here are two shots showing the right side of the Halloween Village window display. The top image shows the Ectomobile from the Ghostbusters movies, along with the only un-haunted house in the display, the house from the animated movie Up (well almost un-haunted, we did add a ghost coming out of the chimney).

The second picture shows the area behind the Ectomobile, on the left is our larger ceramic candle holder (with a color changing light inside) and on the right the Disney Haunted Mansion from Paris Disney, Liberty Square. The ghosts you see flying in front of the display are a couple of gel stickies stuck to the inside of the glass. This brings the viewer right up to the ghosts, or the other way around.

Stay Puff Marshmallow Man positioned in the village

Stay Puff Marshmallow Man Paper Model from Ghostbusters.

Here is a nice shot of the Stay Puff Marshmallow Man from Ghostbusters. In a previous post I talked about making this paper model. Here he is in his final position in the Halloween Village window display. The haunted house that he is terrorizing is a ceramic candle holder, you put the candle in from the back and the windows light up. The Phantom Manor is in the back and on the far left is the Bates House. You can just see Slimer on the right. The bridge in front is another store bought item and the large haunted house on the top right is another ceramic candle holder. That house was what started this whole hobby of creating Halloween Villages.

The Bates House in the Halloween Village

Here is the Bates House  from Psycho in its Halloween Village display location. To the left is another haunted house. Several of the Ghosts you see are simply paper cutouts from clip art. The fence along the front is a store bought Halloween Decoration, same for the two Trick or Treaters to the right of the fence. Running up the walkway is a line of lighted Skulls, also store bought. There are a few nice items in the craft stores every year for Halloween, and we have been buying one or two items each year, giving us a nice collection of additional decorations to spice up our village. We mostly look for accessory items, like fences and bridges. The main structures and decorations are always hand made.

Here is the same view with the special effects lighting. The purple color is from the black light, you can now easily see the Phantom Manor in the background lit by street lights. Notice how the paper in the Bates House glows under the black light. Basically, the lighter the area (less ink) the more the glowing affect. Blank Paper glows nicely, so anything made out of paper glows well under black light. Real easy to see the lighted skulls along the walkway in this image as well.

Phantom Manor with lighting

Here is the Stay Puff Marshmallow Man and the Phantom Manor in the display with lighting effects.

There is a black light in front of the whole display, some color changing lights on the sides (lighting StayPuff green on the left at the moment) and some practical street lights. You can see two street lights above the entrance gate to the Phantom Manor in the back. It really all comes down to the lighting, although I put a lot of time and effort into the models for my displays, even basic models and toys look great with good lighting.

Adding Phantom Manor to Window Display

Here is the Phantom Manor Paper Model added to our Window Display Halloween Village. This shot is after all of the additional detail items have been added around the model.

Phantom Manor Paper Model

Notice the Staypuff Marshmallow Man in the foreground. The ghost above the gate is a stick-on from the scrap book section of Michaels Arts and Crafts, the Trick 'n Treater in the gate is a paper cutout from some clip art. The Skeleton Bear on the left is a small stuffed toy. You can just make out the camouflage drop cloth beneath the Skeleton Bear that I laid down over the entire table to act as a ground cover. These drop cloths work great, once you put some stuff on them and light the display, they just blend in.